The amplitude of 15 sin (1000 pi t) is modula | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The carrier wave is given by $V_c(t) = 15 \sin(1000 \pi t)$.Comparing this with $V_c(t) = A_c \sin(2 \pi f_c t)$,we get $2 \pi f_c = 1000 \pi$,so

Vedclass · Accepted Answer

$A, D$ and $E$ only

Vedclass · Answer

(B) The carrier wave is given by $V_c(t) = 15 \sin(1000 \pi t)$.Comparing this with $V_c(t) = A_c \sin(2 \pi f_c t)$,we get $2 \pi f_c = 1000 \pi$,so $f_c = 500 	ext{ Hz}$.The modulating signal is given by $V_m(t) = 10 \sin(4 \pi t)$.Comparing this with $V_m(t) = A_m \sin(2 \pi f_m t)$,we get $2 \pi f_m = 4 \pi$,so $f_m = 2 	ext{ Hz}$.An amplitude modulated signal consists of the carrier frequency $f_c$ and two sideband frequencies $(f_c - f_m)$ and $(f_c + f_m)$.Sideband frequencies are:Lower sideband: $f_c - f_m = 500 - 2 = 498 	ext{ Hz}$.Upper sideband: $f_c + f_m = 500 + 2 = 502 	ext{ Hz}$.Thus,the frequencies present are $500 	ext{ Hz}$,$498 	ext{ Hz}$,and $502 	ext{ Hz}$,which correspond to options $A, D,$ and $E$.

The amplitude of $15 \sin (1000 \pi t)$ is modulated by $10 \sin (4 \pi t)$ signal. The amplitude modulated signal contains frequency(ies) of
$A) 500 \text{ Hz}$
$B) 2 \text{ Hz}$
$C) 250 \text{ Hz}$
$D) 498 \text{ Hz}$
$E) 502 \text{ Hz}$
Choose the correct answer from the options given below:

Similar Questions

$A$ signal of $0.1 \, kW$ is transmitted in a cable. The attenuation of the cable is $-5 \, dB$ per $km$ and the cable length is $20 \, km$. The power received at the receiver is $10^{-x} \, W$. The value of $x$ is ....... .
$[\text{Gain in } dB = 10 \log_{10}(\frac{P_0}{P_i})]$

$A$ message signal of frequency $10 kHz$ is used to modulate a carrier wave of frequency $6 MHz$. The sideband frequencies are:

For transmitting a signal of frequency $1 \text{ kHz}$,the wavelength of the wave should be:

If the area covered by an $FM$ radio station is to be doubled,by what factor must the height of the antenna be increased?

Which of the following modulated signals has the best noise tolerance?

Vedclass Test Series

Exam Paper Generator

Online Exam Module

The amplitude of $15 \sin (1000 \pi t)$ is modulated by $10 \sin (4 \pi t)$ signal. The amplitude modulated signal contains frequency(ies) of$A) 500 \text{ Hz}$$B) 2 \text{ Hz}$$C) 250 \text{ Hz}$$D) 498 \text{ Hz}$$E) 502 \text{ Hz}$Choose the correct answer from the options given below: