The area of cross-section of a wire of length $1.1 \, m$ is $1 \, mm^2$. It is loaded with $1 \, kg$. If Young's modulus of copper is $1.1 \times 10^{11} \, N/m^2$,then the increase in length will be ......... $mm$ (Take $g = 10 \, m/s^2$)

$A$ thin $1 \, m$ long rod has a radius of $5 \, mm$. $A$ force of $50 \, \pi \, kN$ is applied at one end to determine its Young's modulus. Assume that the force is exactly known. If the least count in the measurement of all lengths is $0.01 \, mm$,which of the following statements is false?

If $\delta$ is the depression produced in a beam of length $L$,breadth $b$ and thickness $d$,when a load $W$ is placed at the mid-point,then:

$A$ cylindrical rod made of aluminum has a length of $1 \,m$ and a diameter of $10 \,cm$. The rod is subjected to a tensile force of $100 \,kN$. Calculate the elongation in the rod. (Young's modulus of aluminum $= 70 \,GPa$)

One end of the steel rod is clamped to the roof and the other end is attached to a mass of $1000 \,kg$ as shown in the figure. The length of the rod is $50 \,cm$ and its cross-sectional area is $1000 \,mm^2$. The change in the length of the rod due to the weight of the mass is (Young's modulus of steel $= 2 \times 10^{11} \,Nm^{-2}$ and acceleration due to gravity $= 10 \,ms^{-2}$) (in $\,mm$)

Which one of the following is not a unit of Young's modulus?