The coils of a step-down transformer have $500$ and $5000$ turns. In the primary coil, an $AC$ current of $4 \,A$ at $2200 \,V$ is sent. The value of the current and potential difference in the secondary coil is:

$1\, MW$ power is to be delivered from a power station to a town $10\, km$ away. One uses a pair of $Cu$ wires of radius $0.5\, cm$ for this purpose. Calculate the fraction of ohmic losses to power transmitted if
$(a)$ power is transmitted at $220\, V$. Comment on the feasibility of doing this.
$(b)$ a step-up transformer is used to boost the voltage to $11000\, V$,power is transmitted,then a step-down transformer is used to bring voltage to $220\, V$.
Given: $\rho_{Cu} = 1.7 \times 10^{-8}\, \Omega \cdot m$.

$A$ transformer has a turn ratio of $100/1$. If the secondary coil has a $4 \, A$ current,then the current in the primary coil is......$A$

$A$ loss-free transformer has $500$ turns on its primary winding and $2500$ turns in its secondary winding. The meters of the secondary indicate $200 \, V$ at $8 \, A$ under these conditions. The voltage and current in the primary are:

$A$ current of $5 \,A$ is flowing at $220 \,V$ in the primary coil of a transformer. If the voltage produced in the secondary coil is $2200 \,V$ and $50 \%$ of power is lost, then the current in the secondary will be (in $A$)

$A$ step-down transformer is connected to a $2400\,V$ line, and $80\,A$ of current is found to flow in the output load. The ratio of the turns in the primary and secondary coil is $20:1$. If the transformer efficiency is $100\%$, then the current flowing in the primary coil will be......$A$.