The diameter of a brass rod is $4 \ mm$ and Young's modulus of brass is $9 \times 10^{10} \ N/m^2$. The force required to stretch it by $0.1\%$ of its original length is:

Young's modulus of elasticity of a material depends upon

In a human pyramid in a circus,the entire weight of the balanced group is supported by the legs of a performer who is lying on his back. The combined mass of all the persons performing the act,and the tables,plaques,etc.,involved is $280 \; kg$. The mass of the performer lying on his back at the bottom of the pyramid is $60 \; kg$. Each thighbone (femur) of this performer has a length of $50 \; cm$ and an effective radius of $2.0 \; cm$. Determine the amount by which each thighbone gets compressed under the extra load. (Take Young's modulus for bone $Y = 9.4 \times 10^9 \; N/m^2$)

In an experiment to determine the Young's modulus of a wire of length exactly $1\;m$,the extension in the length of the wire is measured as $0.4\;mm$ with an uncertainty of $\pm 0.02\;mm$ when a load of $1\;kg$ is applied. The diameter of the wire is measured as $0.4\;mm$ with an uncertainty of $\pm 0.01\;mm$. The error in the measurement of Young's modulus $(\Delta Y)$ is found to be $x \times 10^{10}\;N/m^2$. The value of $x$ is (Take $g = 10\;m/s^2$)

The Young's modulus of a wire of length $L$ and radius $r$ is $Y$. If the length is reduced to $\frac{L}{2}$ and radius is $\frac{r}{2}$,then the Young's modulus will be

Longitudinal stress of $1\,kg/mm^2$ is applied on a wire. The percentage increase in length is $(Y = 10^{11}\,N/m^2)$. (in $\%$)