The dimensions of four wires of the same material are given below. In which wire will the increase in length be maximum when the same tension is applied?

Two wires are made of the same material and have the same volume. The first wire has cross-sectional area $A$ and the second wire has cross-sectional area $3A$. If the length of the first wire is increased by $\Delta l$ on applying a force $F$,how much force is needed to stretch the second wire by the same amount?

Two metal wires $A$ and $B$ have lengths $L$ and $3L$ respectively. The radii of the cross-sectional circular areas of wires $A$ and $B$ are $R$ and $2R$, respectively. These wires are joined end-to-end along their axis. When one end of the combined system is fixed and the other end is pulled with a constant force $F$, the elongation in both wires is equal. If $Y_A$ and $Y_B$ are the Young's moduli of wires $A$ and $B$, respectively, then the ratio $Y_B / Y_A$ is:

The decrease in length of a metal bar of length $L$ and cross-sectional area $A$ when compressed with a load $F$ along its length is (where $Y$ is Young's modulus of the material of the metal bar).

$A$ compressive force, $F$ is applied at the two ends of a long thin steel rod. It is heated, simultaneously, such that its temperature increases by $\Delta T$. The net change in its length is zero. Let $l$ be the length of the rod, $A$ its area of cross-section, $Y$ its Young's modulus, and $\alpha$ its coefficient of linear expansion. Then, $F$ is equal to

$A$ steel wire $1.5\,m$ long and of radius $1\,mm$ is attached with a load of $3\,kg$ at one end,while the other end is fixed. It is whirled in a vertical circle with a frequency of $2\,Hz$. Find the elongation of the wire when the weight is at the lowest position. (Given: $Y = 2 \times 10^{11}\,N/m^2$ and $g = 10\,m/s^2$)