The function of a detector is to demodulate t | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) In the demodulation process,the detector performs the following functions:$(a)$ Rectification: This process converts all negative-going peaks into

Vedclass · Accepted Answer

rectification and filtering

Vedclass · Answer

(C) In the demodulation process,the detector performs the following functions:$(a)$ Rectification: This process converts all negative-going peaks into positive-going peaks,effectively allowing the envelope of the modulated wave to be extracted.$(b)$ Filtering: This step involves the separation of the high-frequency carrier components from the low-frequency message signal using a low-pass filter,leaving only the original information signal.

The function of a detector is to demodulate the modulated carrier wave and the steps for this process are

Similar Questions

In an amplitude modulated signal,the maximum amplitude is $15 V$ and the minimum amplitude is $5 V$. The amplitude of the modulating wave will be (in $V$)

$A$ $25\, m$ long antenna is mounted on an antenna tower. The height of the antenna tower is $75\, m$. The wavelength (in meter) of the signal transmitted by this antenna would be

Which of the following four alternatives is not correct? We need modulation:

The sound produced by a tuning fork is a/an .....

What are the primary causes of signal attenuation in an optical fiber?

Vedclass Test Series

Exam Paper Generator

Online Exam Module