The length of a metal wire is found to be $L_1$ and $L_2$ when the tensions $T_1$ and $T_2$ are applied to it respectively. The natural length of the wire is

$A$ metal bar of length $L$ and area of cross-section $A$ is clamped between two rigid supports. For the material of the rod,its Young's modulus is $Y$ and coefficient of linear expansion is $\alpha$. If the temperature of the rod is increased by $\Delta t ^\circ C$,the force exerted by the rod on the supports is

$A$ metal string $A$ is suspended from a rigid support and its free end is attached to a block of mass $M$. $A$ second block having mass $2M$ is suspended at the bottom of the first block using a string $B$. The area of cross-sections of strings $A$ and $B$ are the same. The ratio of lengths of strings $A$ to $B$ is $2$ and the ratio of their Young's moduli $(Y_A/Y_B)$ is $0.5$. The ratio of elongations in $A$ to $B$ is . . . . . . .

Two wires $A$ and $B$ of same length, same radius and same Young's modulus are heated to the same range of temperatures. If the coefficient of linear expansion of $A$ is $\frac{3}{2}$ times that of $B$, then the ratio of the thermal stresses produced in the two wires $A$ and $B$ is

What is the Young's modulus and bulk modulus for a perfect rigid body?

Copper of fixed volume $V$ is drawn into a wire of length $l$. When this wire is subjected to a constant force $F$,the extension produced in the wire is $\Delta l$. Which of the following graphs is a straight line?