The linear density of a vibrating string is $1.3 \times 10^{-4} \, kg/m$. $A$ transverse wave is propagating on the string and is described by the equation $Y = 0.021 \, \sin(x + 30t)$,where $x$ and $y$ are measured in meters and $t$ in seconds. The tension in the string is ..... $N$.

$A$ string of length $0.4\, m$ and mass $10^{-2}\, kg$ is tightly clamped at its ends. The tension in the string is $1.6\, N$. Identical wave pulses are produced at one end at equal intervals of time $\Delta t$. The minimum value of $\Delta t$ which allows constructive interference between successive pulses is .... $s$

$A$ mass of $20\ kg$ is hanging with the support of two strings of the same linear mass density. Now,pulses are generated in both strings at the same time near the joint at the mass. The ratio of the time taken by a pulse to travel through string $1$ to that taken by a pulse on string $2$ is:

$A$ uniform metal wire has length $L$,mass $M$,and cross-sectional area $A$. It is under tension $T$,and $V$ is the speed of a transverse wave along the wire. The density of the wire is:

$A$ uniform rope having some mass hangs vertically from a rigid support. $A$ transverse wave pulse is produced at the lower end. The speed $(v)$ of the wave pulse varies with height $(h)$ from the lower end as:

$A$ uniform rope of mass $0.1 \,kg$ and length $2.45 \,m$ hangs from a rigid support. The time taken by a transverse wave formed in the rope to travel through the full length of the rope is (Assume $g = 9.8 \,m/s^2$). (in $\,s$)