The plot given below is of the average power delivered to an $LRC$ circuit versus frequency. The quality factor of the circuit is

If the reading of the voltmeter $V$ shown in the figure at resonance is $200 \, V$,then the quality factor of the circuit is:

The $Q$ factor of a series $LCR$ circuit with $L = 2 \ H$,$C = 32 \ \mu F$,and $R = 10 \ \Omega$ is:

An a.c. e.m.f. of peak value $230 \ V$ and frequency $50 \ Hz$ is connected to a circuit with $R=11.5 \ \Omega, L=2.5 \ H$ and a capacitor all in series. The value of capacitance is '$C$' for the current in the circuit to be maximum. The value of '$C$' and maximum current are respectively $(\pi^2=10)$

The $Q$-value of a series $LCR$ circuit with $L=2 \ H$,$C=32 \ \mu F$,and $R=20 \ \Omega$ is:

An inductor of $0.5 \,mH$,a capacitor of $200 \,\mu F$ and a resistor of $2 \,\Omega$ are connected in series with a $220 \,V$ ac source. If the current is in phase with the emf,the frequency of ac source will be ................ $\times 10^{2} \,Hz$