The unit of thermal conductivity is

Wires $A$ and $B$ have identical lengths and have circular cross-sections. The radius of $A$ is twice the radius of $B$,$i.e.$,${r_A} = 2{r_B}$. For a given temperature difference between the two ends,both wires conduct heat at the same rate. The relation between the thermal conductivities is given by:

There are two identical vessels filled with equal amounts of ice. The vessels are made of different metals. If the ice melts in the two vessels in $20$ and $35$ minutes respectively,the ratio of the coefficients of thermal conductivity of the two metals is:

Three metal rods made of copper, brass, and steel, each with a cross-sectional area of $4 \,cm^2$, are joined as shown in the figure. Their lengths are $46 \,cm, 13 \,cm$, and $12 \,cm$ respectively. Their coefficients of thermal conductivity are $0.92, 0.26$, and $0.12$ respectively, all in $CGS$ units. The rods are thermally insulated from the surroundings except at the ends. The rate of flow of heat through the copper rod, in $cal \,s^{-1}$, is:

The two opposite faces of a cubical piece of iron (thermal conductivity $= 0.2 \text{ CGS units}$) are at $100^{\circ}C$ and $0^{\circ}C$ in ice. If the area of a surface is $4 \text{ cm}^2$,then the mass of ice melted in $10 \text{ minutes}$ will be ...... $\text{gm}$.

$A$ brass boiler has a base area of $0.15\; m^{2}$ and thickness $1.0\; cm$. It boils water at the rate of $6.0\; kg/min$ when placed on a gas stove. Estimate the temperature (in $^oC$) of the part of the flame in contact with the boiler. Thermal conductivity of brass $= 109\; J s^{-1} m^{-1} K^{-1}$; Heat of vaporisation of water $= 2256 \times 10^{3}\; J kg^{-1}$.