The vernier calliper used for measurement has a positive zero error of $0.3 \ mm$. While taking measurement for the internal diameter of a vessel,it was observed that the zero of the vernier scale lies between $9.5 \ cm$ and $9.6 \ cm$ of the main scale and the $6^{th}$ division of the vernier scale coincides with a main scale division. If the least count of the vernier calliper is $0.01 \ cm$,the correct value of the diameter will be: (in $cm$)

$A$ screw gauge has some zero error but its value is unknown. We have two identical rods. When the first rod is inserted in the screw gauge,the state of the instrument is shown by diagram $(I)$. When both the rods are inserted together in series,the state is shown by diagram $(II)$. What is the zero error of the instrument in $mm$? Given: $1 \, M.S.D. = 100 \, C.S.D. = 1 \, mm$.

The main scale of a vernier caliper reads in millimeters and its vernier scale is divided into $8$ divisions,which coincide with $5$ divisions of the main scale. When the two jaws of the instrument touch each other,the zero of the vernier scale coincides with the zero of the main scale. $A$ rod is placed between the two jaws. It is observed that the zero of the vernier scale lies just to the left of the $36^{th}$ division of the main scale and the fourth division of the vernier scale coincides with a main scale division. The measured value is .......... $cm$.

In an experiment to find out the diameter of a wire using a screw gauge,the following observations were noted:
$(a)$ The screw moves $0.5\,mm$ on the main scale in one complete rotation.
$(b)$ Total divisions on the circular scale $= 50$.
$(c)$ Main scale reading is $2.5\,mm$.
$(d)$ The $45^{\text{th}}$ division of the circular scale is on the pitch line.
$(e)$ The instrument has a $0.03\,mm$ negative zero error.
Then the diameter of the wire is $...........\,mm$.

Identify the physical quantity that cannot be measured using a spherometer:

The internal and external radii of a hollow cylinder are measured with the help of a vernier callipers. Their values are $(4.23 \pm 0.01) \, cm$ and $(3.87 \pm 0.01) \, cm,$ respectively. The thickness of the wall of the cylinder is