The vernier scale of a travelling microscope has $50$ divisions which coincide with $49$ main scale divisions. If each main scale division is $0.5 \ mm$,calculate the minimum inaccuracy in the measurement of distance. (in $mm$)

In a screw gauge, the zero of the main scale reference line coincides with the fifth division of the circular scale when two studs are in contact. There are $100$ divisions on the circular scale and the pitch of the screw gauge is $0.1 \text{ mm}$. When the diameter of a sphere is measured, the reading of the main scale is $5 \text{ mm}$ and the $50^{th}$ division of the circular scale coincides with the reference line of the main scale. The diameter of the sphere is . . . . . . $\text{mm}$.

The diameter of a wire is measured with a screw gauge having a least count of $0.01\;mm$. Which of the following correctly expresses the diameter?

$A$ specially designed Vernier calliper has the main scale least count of $1 \,mm$. On the Vernier scale,there are $10$ equal divisions and they match with $11$ main scale divisions. Then,the least count of the Vernier calliper is ........... $mm$.

The main scale of a vernier caliper reads in millimeters and its vernier scale is divided into $8$ divisions,which coincide with $5$ divisions of the main scale. When the two jaws of the instrument touch each other,the zero of the vernier scale coincides with the zero of the main scale. $A$ rod is placed between the two jaws. It is observed that the zero of the vernier scale lies just to the left of the $36^{th}$ division of the main scale and the fourth division of the vernier scale coincides with a main scale division. The measured value is .......... $cm$.

Match the instruments in Column-$I$ with their respective least counts in Column-$II$.

Column-$I$	Column-$II$
$(1)$ Traveling Microscope	$(a)$ $0.01\,cm$
$(2)$ Screw Gauge	$(b)$ $0.001\,cm$
	$(c)$ $0.0001\,cm$