There are $100$ divisions on the circular scale of a screw gauge of pitch $1 \,mm$. With no measuring quantity in between the jaws,the zero of the circular scale lies $5$ divisions below the reference line. The diameter of a wire is then measured using this screw gauge. It is found that $4$ linear scale divisions are clearly visible while $60$ divisions on the circular scale coincide with the reference line. The diameter of the wire is: (in $\,mm$)

In an experiment to find out the diameter of a wire using a screw gauge,the following observations were noted:
$(a)$ The screw moves $0.5\,mm$ on the main scale in one complete rotation.
$(b)$ Total divisions on the circular scale $= 50$.
$(c)$ Main scale reading is $2.5\,mm$.
$(d)$ The $45^{\text{th}}$ division of the circular scale is on the pitch line.
$(e)$ The instrument has a $0.03\,mm$ negative zero error.
Then the diameter of the wire is $...........\,mm$.

Which of the following is the most precise device for measuring length:
$A)$ a vernier callipers with $20$ divisions on the sliding scale
$B)$ a screw gauge of pitch $1 \; mm$ and $100$ divisions on the circular scale
$C)$ an optical instrument that can measure length to within a wavelength of light?

$A$ screw gauge with a pitch of $0.5 \ mm$ and a circular scale with $50$ divisions is used to measure the thickness of a thin sheet of Aluminium. Before starting the measurement,it is found that when the two jaws of the screw gauge are brought in contact,the $45^{th}$ division coincides with the main scale line and the zero of the main scale is barely visible. What is the thickness of the sheet (in $mm$) if the main scale reading is $0.5 \ mm$ and the $25^{th}$ division coincides with the main scale line?

The main scale division of a vernier caliper is $1 \ mm$. The vernier scale divisions are in an arithmetic progression $(A.P.)$; the $1^{st}$ division is $0.95 \ mm$, the $2^{nd}$ division is $0.90 \ mm$, and so on. When an object is placed between the jaws of the vernier caliper, the zero of the vernier scale lies between $3.1 \ cm$ and $3.2 \ cm$, and the $4^{th}$ division of the vernier scale coincides with a main scale division. The reading of the vernier caliper is .......... $cm$.

Match the instruments in Column-$I$ with their respective least counts in Column-$II$.

Column-$I$	Column-$II$
$(1)$ Traveling Microscope	$(a)$ $0.01\,cm$
$(2)$ Screw Gauge	$(b)$ $0.001\,cm$
	$(c)$ $0.0001\,cm$