Three rods AB, BC and AC having thermal resis | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The thermal circuit can be analyzed by considering the thermal resistances. The rods $AB$ and $BC$ are in series with each other,and this combinat

Vedclass · Accepted Answer

$5$

Vedclass · Answer

(A) The thermal circuit can be analyzed by considering the thermal resistances. The rods $AB$ and $BC$ are in series with each other,and this combination is in parallel with rod $AC$.Thermal resistance of the series branch ($AB$ and $BC$) is $R_1 = 10 + 10 = 20 	ext{ units}$.Thermal resistance of the parallel branch $(AC)$ is $R_2 = 20 	ext{ units}$.The equivalent thermal resistance $R_{eq}$ between points $A$ and $C$ is given by $\frac{1}{R_{eq}} = \frac{1}{R_1} + \frac{1}{R_2} = \frac{1}{20} + \frac{1}{20} = \frac{2}{20} = \frac{1}{10}$.Thus,$R_{eq} = 10 	ext{ units}$.The total rate of heat flow from $A$ to $C$ is $\frac{dH}{dt} = \frac{\Delta T}{R_{eq}} = \frac{100 - 0}{10} = 10 	ext{ units}$.Since the branch $AB+BC$ has a resistance of $20 	ext{ units}$ and the branch $AC$ has a resistance of $20 	ext{ units}$,the total heat flow splits equally between the two branches.Therefore,the rate of heat flow through the junction $B$ (which is part of the $AB+BC$ branch) is $\frac{10}{2} = 5 	ext{ units}$.

Similar Questions

$A$ metallic prong consists of $4$ rods made of the same material,with the same cross-sections and the same lengths as shown below. The three forked ends are kept at $100^{\circ} C$ and the handle end is at $0^{\circ} C$. The temperature of the junction is ............. $^{\circ} C$.

Four identical rods of the same material are joined end to end to form a square. If the temperature difference between the ends of a diagonal is $100^{\circ}C$,then the temperature difference between the ends of the other diagonal will be ........ $^{\circ}C$.

Two identical metal wires of thermal conductivities $K_{1}$ and $K_{2}$ respectively are connected in series. The effective thermal conductivity of the combination is

$A$ slab consists of two parallel layers of copper and brass of equal thickness. The ratio of their thermal conductivities is $1:4$. If the temperature of the free side of the brass is $100^{\circ}C$ and that of the copper is $0^{\circ}C$,find the temperature of the interface in $^{\circ}C$.

Vedclass Test Series

Exam Paper Generator

Online Exam Module