Two cylinders $A$ and $B$ fitted with pistons contain equal amounts of an ideal diatomic gas at $300 \ K$. The piston of $A$ is free to move,while that of $B$ is held fixed. The same amount of heat is given to the gas in each cylinder. If the rise in temperature of the gas in $A$ is $30 \ K$,then the rise in temperature of the gas in $B$ is ..... $K$.

Two cylinders $A$ and $B$ fitted with pistons contain equal amount of an ideal diatomic gas at $303 \text{ K}$. The piston of cylinder $A$ is free to move and that of cylinder $B$ is held fixed. The same amount of heat is given to the gas in each cylinder. If the rise in temperature of the gas in cylinder $B$ is $63 \text{ K}$, then the rise in temperature of the gas in $A$ is: (in $\text{ K}$)

Two moles of helium gas $\left(\gamma = \frac{5}{3}\right)$ at $27^{\circ} C$ is expanded at constant pressure until its volume is doubled. Then it undergoes an adiabatic change until the temperature returns to its initial value. The work done during the adiabatic process is (universal gas constant $R = 8.3 \ J \ mol^{-1} \ K^{-1}$) (in $J$)

The efficiency of a Carnot engine operating with a hot reservoir kept at a temperature of $1000 K$ is $0.4$. It extracts $150 J$ of heat per cycle from the hot reservoir. The work extracted from this engine is being fully used to run a heat pump which has a coefficient of performance $10$. The hot reservoir of the heat pump is at a temperature of $300 K$. Which of the following statements is/are correct:
$(A)$ Work extracted from the Carnot engine in one cycle is $60 J$.
$(B)$ Temperature of the cold reservoir of the Carnot engine is $600 K$.
$(C)$ Temperature of the cold reservoir of the heat pump is $270 K$.
$(D)$ Heat supplied to the hot reservoir of the heat pump in one cycle is $540 J$.

Three processes form a thermodynamic cycle as shown on the $P-V$ diagram for an ideal gas. Process $1 \rightarrow 2$ takes place at a constant temperature $(300 \ K)$. Process $2 \rightarrow 3$ takes place at a constant volume. During this process,$40 \ J$ of heat leaves the system. Process $3 \rightarrow 1$ is adiabatic and the temperature $T_3$ is $275 \ K$. The work done by the gas during the process $3 \rightarrow 1$ is ..... $J$.

Match the thermodynamic processes taking place in a system with the correct conditions. In the table: $\Delta Q$ is the heat supplied,$\Delta W$ is the work done and $\Delta U$ is change in internal energy of the system.

Process	Condition
$(I)$ Adiabatic	$(A) \Delta W = 0$
$(II)$ Isothermal	$(B) \Delta Q = 0$
$(III)$ Isochoric	$(C) \Delta U \neq 0, \Delta W \neq 0, \Delta Q \neq 0$
$(IV)$ Isobaric	$(D) \Delta U = 0$