Two similar wires of equal lengths are bent in the form of a square and a circular loop. They are suspended in a uniform magnetic field and the same current is passed through them. The torque experienced by:

$A$ conducting ring of mass $2 \ kg$ and radius $0.5 \ m$ is placed on a smooth horizontal plane. The ring carries a current $i = 4 \ A$. $A$ horizontal magnetic field $B = 10 \ T$ is switched on at time $t = 0$ as shown in the figure. The initial angular acceleration of the ring will be:

$A$ rectangular conducting loop consists of two wires on two opposite sides of length $l$ joined together by rods of length $d$. The wires are each of the same material but with cross-sections differing by a factor of $2$. The thicker wire has a resistance $R$ and the rods are of low resistance,which in turn are connected to a constant voltage source $V_{0}$. The loop is placed in a uniform magnetic field $\vec{B}$ at $45^{\circ}$ to its plane. Find the torque exerted by the magnetic field on the loop about an axis through the centers of the rods.

$A$ single circular loop of radius $1.00 \, m$ carries a current of $10.0 \, mA$. It is placed in a uniform magnetic field of magnitude $0.500 \, T$ that is directed parallel to the plane of the loop as shown in the figure. The magnitude of the torque exerted on the loop by the magnetic field is:

$A$ current $i$ flows in a circular coil of radius $r$. If the coil is placed in a uniform magnetic field $B$ with its plane parallel to the field,the magnitude of the torque that acts on the coil is

$A$ coil in the shape of an equilateral triangle of side $2 \,cm$ is suspended from a vertex such that it hangs in a vertical plane between the poles of a permanent magnet producing a horizontal magnetic field of $100 \times 10^{-3} \,T$. The magnetic field is parallel to the plane of the coil. For the moment of couple acting on the coil to be $2 \sqrt{3} \times 10^{-5} \,Nm$, the current to be passed through the coil is (in $A$)