When is thermal conductivity said to be constant?

Two plates of equal area are placed in series. The ratios of their thicknesses and thermal conductivities are both $2:3$. The temperature of the outer surface of one plate is $100 ^\circ C$ and that of the other is $0 ^\circ C$. The temperature of the common surface is ....... $^\circ C$.

Three conducting rods of the same material and cross-section are shown in the figure. The temperatures of $A$,$D$,and $C$ are maintained at $20^{\circ} C$,$90^{\circ} C$,and $0^{\circ} C$ respectively. If there is no heat flow in rod $AB$,the ratio of the lengths of $BD$ and $BC$ is:

$A$ cylindrical metallic rod in thermal contact with two reservoirs of heat at its two ends conducts an amount of heat $Q$ in time $t$. The metallic rod is melted and the material is formed into a rod of half the radius of the original rod. What is the amount of heat conducted by the new rod,when placed in thermal contact with the same two reservoirs in time $t$?

The ends of two rods of different materials with their thermal conductivities,radii of cross-sections,and lengths all in the ratio $1:2$ are maintained at the same temperature difference. If the rate of flow of heat in the larger rod is $4 \; cal/sec$,the rate of flow of heat in the shorter rod in $cal/sec$ will be:

$A$ 'thermacole' icebox is a cheap and an efficient method for storing small quantities of cooked food in summer in particular. $A$ cubical icebox of side $30 \,cm$ has a thickness of $5.0 \,cm$. If $4.0 \,kg$ of ice is put in the box,estimate the amount of ice (in $kg$) remaining after $6 \,h$. The outside temperature is $45 \,^{\circ}C$,and the coefficient of thermal conductivity of thermacole is $0.01 \,J \,s^{-1} \,m^{-1} \,K^{-1}$. Heat of fusion of water $= 335 \times 10^{3} \,J \,kg^{-1}$.