Which of the following statements is correct regarding the $p-V$ graph?
$1$. The slope of the $p-V$ graph in an isothermal process is $-\frac{p}{V}$.
$2$. The slope of the $p-V$ graph in an adiabatic process is $-\frac{p}{V}$.
$3$. The slope of the $p-V$ graph in an isochoric process is $-\frac{\gamma p}{V}$.
$4$. The slope of the $p-V$ graph in an isobaric process is zero.

$A$ monoatomic gas at pressure $P$ having volume $V$ expands isothermally to a volume $2V$ and then adiabatically to a volume $16V$. The final pressure of the gas is $\left(\gamma = \frac{5}{3}\right)$.

Initial pressure and volume of a gas are $P$ and $V$ respectively. First,its volume is expanded to $4V$ by an isothermal process,and then its volume is reduced to $V$ by an adiabatic process. Find its final pressure if $\gamma = \frac{3}{2}$.

$A$ gas is enclosed in a cylinder with a movable frictionless piston. Its initial thermodynamic state at pressure $P_i = 10^5 \text{ Pa}$ and volume $V_i = 10^{-3} \text{ m}^3$ changes to a final state at $P_f = (1/32) \times 10^5 \text{ Pa}$ and $V_f = 8 \times 10^{-3} \text{ m}^3$ in an adiabatic quasi-static process, such that $P^3 V^5 = \text{constant}$. Consider another thermodynamic process that brings the system from the same initial state to the same final state in two steps: an isobaric expansion at $P_i$, followed by an isochoric (isovolumetric) process at volume $V_f$. The amount of heat supplied to the system in the two-step process is approximately: (in $\text{ J}$)

The initial pressure and volume of a gas are $P$ and $V$ respectively. First,the gas is expanded to a volume of $9V$ by an isothermal process,and then it is compressed to a volume of $V$ by an adiabatic process. What is its final pressure (in $P$)? (Ratio of specific heat at constant pressure to constant volume $\gamma = \frac{3}{2}$)

One mole of a monoatomic ideal gas goes through a thermodynamic cycle,as shown in the volume versus temperature $(V-T)$ diagram. The correct statement$(s)$ is/are :
[$R$ is the gas constant]
$(1)$ Work done in this thermodynamic cycle $(1 \rightarrow 2 \rightarrow 3 \rightarrow 4 \rightarrow 1)$ is $|W| = \frac{1}{2} RT_0$
$(2)$ The ratio of heat transfer during processes $1 \rightarrow 2$ and $2 \rightarrow 3$ is $\left|\frac{Q_{1 \rightarrow 2}}{Q_{2 \rightarrow 3}}\right| = \frac{5}{3}$
$(3)$ The above thermodynamic cycle exhibits only isochoric and adiabatic processes.
$(4)$ The ratio of heat transfer during processes $1 \rightarrow 2$ and $3 \rightarrow 4$ is $\left|\frac{Q_{1 \rightarrow 2}}{Q_{3 \rightarrow 4}}\right| = \frac{1}{2}$