“By increasing current sensitivity,voltage sensitivity is also increased”. This statement is true or false.

In the given figure,an ammeter $A$ consists of a $240 \Omega$ coil connected in parallel to a $10 \Omega$ shunt. The reading of the ammeter is . . . . . . $mA$.

$A$ galvanometer having a coil of resistance $30 \ \Omega$ needs $20 \ \text{mA}$ of current for full-scale deflection. If a maximum current of $3 \ \text{A}$ is to be measured using this galvanometer,the resistance of the shunt to be added to the galvanometer should be $\frac{30}{X} \ \Omega$,where $X$ is

$A$ galvanometer coil has a resistance of $10 \ \Omega$ and the meter shows full-scale deflection for $3 \ \text{mA}$. The value of the shunt required to convert this meter into an ammeter of range $0$ to $10 \ \text{A}$ is . . . . . . $\Omega$.

The sensitivity of a galvanometer that measures current is decreased by $\frac{1}{40}$ times by using a shunt resistance of $10 \Omega$. Then,the value of the resistance of the galvanometer is (in $\Omega$)

The pointer of a dead-beat galvanometer gives a steady deflection because