$A$ wire of area of cross-section $10^{-6} \ m^2$ is increased in length by $0.1 \%$. The tension produced is $1000 \ N$. The Young's modulus of the wire is:

Four identical hollow cylindrical columns of mild steel support a big structure of mass $50,000 \; kg$. The inner and outer radii of each column are $30 \; cm$ and $60 \; cm$ respectively. Assuming the load distribution to be uniform,calculate the compressional strain of each column. (Take Young's modulus of mild steel $Y = 2.0 \times 10^{11} \; Pa$ and $g = 9.8 \; m/s^2$)

In a tensile test on a metal bar of diameter $0.015 \ m$ and length $0.2 \ m$, the relation between the load and elongation within the proportional limit is found to be $F = 97.2 \times 10^6 (\Delta L)$, where $F$ is the load in $N$ and $\Delta L$ is the elongation in $m$. The Young's modulus of the material in $GPa$ is:

$A$ uniform rod of mass $m$,length $L$,area of cross-section $A$ and Young's modulus $Y$ hangs from the ceiling. Its elongation under its own weight will be

Copper of fixed volume $V$ is drawn into a wire of length $l$. When this wire is subjected to a constant force $F$,the extension produced in the wire is $\Delta l$. Which of the following graphs is a straight line?

$A$ structural steel rod has a radius of $10 \;mm$ and a length of $1.0 \;m$. $A$ $100 \;kN$ force stretches it along its length. Calculate $(a)$ stress,$(b)$ elongation,and $(c)$ strain on the rod. Young's modulus of structural steel is $2.0 \times 10^{11} \;N \;m^{-2}$.