In a tensile test on a metal bar of diameter $0.015 \ m$ and length $0.2 \ m$, the relation between the load and elongation within the proportional limit is found to be $F = 97.2 \times 10^6 (\Delta L)$, where $F$ is the load in $N$ and $\Delta L$ is the elongation in $m$. The Young's modulus of the material in $GPa$ is:

As shown in the figure,in an experiment to determine Young's modulus of a wire,the extension-load curve is plotted. The curve is a straight line passing through the origin and makes an angle of $45^{\circ}$ with the load axis. The length of the wire is $62.8\,cm$ and its diameter is $4\,mm$. The Young's modulus is found to be $x \times 10^4\,N/m^2$. The value of $x$ is

Steel and copper wires of the same length are stretched by the same weight one after the other. The Young's modulus of steel and copper are $2 \times 10^{11} \, N/m^2$ and $1.2 \times 10^{11} \, N/m^2$,respectively. What is the ratio of the increase in their lengths?

The area of cross-section of a steel wire $(Y = 2.0 \times 10^{11} \ N/m^2)$ is $0.1 \ cm^2$. The force required to double its length will be

The area of a cross-section of a steel wire is $0.1 \, cm^2$ and Young's modulus of steel is $2 \times 10^{11} \, N \, m^{-2}$. The force required to stretch it by $0.1 \%$ of its original length is ......... $N$.

$A$ wire of length $2 \ m$ and cross-sectional area $10^{-2} \ cm^2$ is fixed at one end. $A$ force of $200 \ N$ is applied at the other end. The coefficient of linear expansion of the wire is $1.1 \times 10^{-5} \ ^oC^{-1}$ and the Young's modulus is $1.2 \times 10^{11} \ N/m^2$. If the temperature is increased by $10^oC$,what will be the thermal stress developed in the wire?