$A$ galvanometer has resistance '$G$' and range '$V_g$'. How much resistance is required to read voltage up to '$V$' volt?

$A$ moving coil galvanometer is converted into an ammeter of range $0$ to $5 \, mA$. The galvanometer resistance is $90 \, \Omega$ and the shunt resistance has a value of $10 \, \Omega$. If there are $50$ divisions in the galvanometer-turned-ammeter on either side of zero, its current sensitivity is

The resistance of a galvanometer is $25\,\Omega$ and it requires $50\,\mu A$ for full-scale deflection. The value of the shunt resistance required to convert it into an ammeter of $5\,A$ range is:

$A$ multirange current meter can be constructed by using a galvanometer circuit as shown in the figure. We want a current meter that can measure $10 \text{ mA}$,$100 \text{ mA}$,and $1 \text{ A}$ using a galvanometer of resistance $10 \text{ } \Omega$ that produces maximum deflection for a current of $1 \text{ mA}$. Find the values of $S_1, S_2$,and $S_3$ that have to be used.

$A$ milliammeter of range $10\, mA$ and resistance $9\, \Omega$ is joined in a circuit as shown. The meter gives full-scale deflection for current $I$ when $A$ and $B$ are used as its terminals,i.e.,current enters at $A$ and leaves at $B$ ($C$ is left isolated). The value of $I$ is

The resistance of an ammeter is $13\, \Omega$ and its scale is graduated for a current up to $100\, A$. After an additional shunt has been connected to this ammeter,it becomes possible to measure currents up to $750\, A$ by this meter. The value of the shunt resistance is: