$A$ cylindrical container containing water has a small hole at a height of $H = 8 \text{ cm}$ from the bottom and at a depth of $h = 2 \text{ cm}$ from the top surface of the liquid. The horizontal distance (range) travelled by the water before it hits the ground is:

  • A
    $4 \text{ cm}$
  • B
    $8 \text{ cm}$
  • C
    $6 \text{ cm}$
  • D
    $4\sqrt{2} \text{ cm}$

Explore More

Similar Questions

$A$ person in a lift is holding a water jar,which has a small hole at the lower end of its side. When the lift is at rest,the water jet coming out of the hole hits the floor of the lift at a distance $d$ of $1.2 \ m$ from the person. In the following,the state of the lift's motion is given in List-$I$ and the distance where the water jet hits the floor of the lift is given in List-$II$. Match the statements from List-$I$ with those in List-$II$ and select the correct answer using the code given below the lists.
List-$I$ List-$II$
$P$. Lift is accelerating vertically up. $1$. $d = 1.2 \ m$
$Q$. Lift is accelerating vertically down with an acceleration less than the gravitational acceleration. $2$. $d < 1.2 \ m$
$R$. Lift is moving vertically up with constant speed. $3$. $d > 1.2 \ m$
$S$. Lift is falling freely. $4$. No water leaks out of the jar.

Water $(\rho_1=1000 \, kg/m^3)$ and kerosene $(\rho_2=800 \, kg/m^3)$ are filled to the same height in two identical cylindrical vessels. Both vessels have small holes at their bottom. The speeds of the water and kerosene coming out of their holes are $v_1$ and $v_2$ respectively. Select the correct alternative.

$A$ large tank filled with water to a height $h$ is to be emptied through a small hole at the bottom. The ratio of times taken for the level of water to fall from $h$ to $h/2$ and from $h/2$ to $0$ is

$A$ large tank is filled with water to a height $H$. $A$ small hole is made at the base of the tank. It takes $T_1$ time to decrease the height of water to $H/\eta$ (where $\eta > 1$),and it takes $T_2$ time to drain the rest of the water. If $T_1 = T_2$,then the value of $\eta$ is:

$A$ cylindrical vessel filled with water up to a height of $H$ stands on a horizontal plane. The side wall of the vessel has a plugged circular hole touching the bottom. The coefficient of friction between the bottom of the vessel and the plane is $\mu$ and the total mass of the water plus the vessel is $M$. What should be the minimum diameter of the hole so that the vessel begins to move on the floor if the plug is removed? (Here,the density of water is $\rho$)

Difficult
View Solution

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo