Water $(\rho_1=1000 \, kg/m^3)$ and kerosene $(\rho_2=800 \, kg/m^3)$ are filled to the same height in two identical cylindrical vessels. Both vessels have small holes at their bottom. The speeds of the water and kerosene coming out of their holes are $v_1$ and $v_2$ respectively. Select the correct alternative.

$A$ fully filled open water tank has two holes on either side of its walls. One is a square hole of side $x \,cm$ at a depth of $2 \,m$ from the top, and the other hole is an equilateral triangle of side $4 \,cm$ at a depth of $6 \,m$ from the top. If the rate of flow of water is the same from both the holes, then the value of $x$ is: (in $\,cm$)

$A$ box filled with water has a small hole on its side near the bottom. It is dropped from the top of a tower. As it falls,a camera attached on the side of the box records the shape of the water stream coming out of the hole. The resulting video will show

Two large,identical water tanks,$1$ and $2$,kept on the top of a building of height $H$,are filled with water up to height $h$ in each tank. Both the tanks contain an identical hole of small radius on their sides,close to their bottom. $A$ pipe of the same internal radius as that of the hole is connected to tank $2$,and the pipe ends at the ground level. When the water flows out of tanks $1$ and $2$ through the holes,the times taken to empty the tanks are $t_1$ and $t_2$,respectively. If $H = (16/9) h$,then the ratio $t_1 / t_2$ is:

$A$ cylindrical vessel filled with water up to a height of $H$ stands on a horizontal plane. The side wall of the vessel has a plugged circular hole touching the bottom. The coefficient of friction between the bottom of the vessel and the plane is $\mu$ and the total mass of the water plus the vessel is $M$. What should be the minimum diameter of the hole so that the vessel begins to move on the floor if the plug is removed? (Here,the density of water is $\rho$)

Water is filled in a cylindrical vessel of height $H$. $A$ hole is made at height $z$ from the bottom, as shown in the figure. The value of $z$ for which the range $(R)$ of the emerging water through the hole will be maximum is: