$A$ wire,$10 \ m$ long,has a resistance of $40 \ \Omega$. It is connected in series with a resistance box of resistance $R$ and a $2 \ V$ storage cell. If the potential gradient along the wire is $0.1 \ mV/cm$,then the value of $R$ is (in $\Omega$)

To determine the internal resistance of a cell with a potentiometer,when the cell is shunted by a resistance of $5 \Omega$,the balancing length is $250 \ cm$. When the cell is shunted by $20 \Omega$,the balancing length of the potentiometer wire is $400 \ cm$. The internal resistance of the cell is: (in $\Omega$)

In a potentiometer experiment, the null point is obtained at a particular point for a cell on a potentiometer wire of length $L$. If the length of the potentiometer wire is increased without changing the cell or the driving source, the balancing length will:

$A$ cell can be balanced against $110 \ cm$ and $100 \ cm$ of potentiometer wire,respectively with and without being short-circuited through a resistance of $10 \ \Omega$. Its internal resistance is

In the given potentiometer circuit arrangement,the balancing length $AC$ is measured to be $250 \, cm$. When the galvanometer connection is shifted from point $(1)$ to point $(2)$ in the given diagram,the balancing length becomes $400 \, cm$. The ratio of the emf of two cells,$\frac{\varepsilon_{1}}{\varepsilon_{2}}$ is -

In a potentiometer, the null point is received at the $7^{th}$ wire. If we now want to shift the null point to the $9^{th}$ wire, what should we do?