A steel wire and a copper wire are joined end | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The formula for Young's modulus $(Y)$ is given by $Y = \frac{F \cdot L}{A \cdot \Delta L}$, where $F$ is the force, $L$ is the original length, $A

Vedclass · Accepted Answer

$20: 11$

Vedclass · Answer

(C) The formula for Young's modulus $(Y)$ is given by $Y = \frac{F \cdot L}{A \cdot \Delta L}$, where $F$ is the force, $L$ is the original length, $A$ is the cross-sectional area, and $\Delta L$ is the elongation.Since the wires are joined end to end and subjected to the same tension $(F)$, the force $F$ is the same for both wires. Given that the cross-sectional areas $(A)$ and elongations $(\Delta L)$ are also equal, we have:$\Delta L = \frac{F \cdot L}{A \cdot Y}$Since $\Delta L$, $F$, and $A$ are constant for both wires, we can write:$\frac{L_{	ext{steel}}}{Y_{	ext{steel}}} = \frac{L_{	ext{copper}}}{Y_{	ext{copper}}}$Rearranging for the ratio of lengths:$\frac{L_{	ext{steel}}}{L_{	ext{copper}}} = \frac{Y_{	ext{steel}}}{Y_{	ext{copper}}}$Substituting the given values:$\frac{L_{	ext{steel}}}{L_{	ext{copper}}} = \frac{2.0 	imes 10^{11}}{1.1 	imes 10^{11}} = \frac{20}{11}$Thus, the ratio is $20: 11$.

Similar Questions

$A$ steel rod with a circular cross-section of diameter $1 \ cm$ and another steel rod with a square cross-section of side $1 \ cm$ have equal mass. If the two rods are subjected to the same tension, the ratio of the elongations of the two rods is

The length of a metal wire is $L_1$ when the tension is $T_1$ and $L_2$ when the tension is $T_2$. The unstretched length of the wire is:

The following four wires are made of the same material. Which of these will have the largest extension when the same tension is applied?

When a rod is heated but prevented from expanding,the stress developed is independent of

$A$ wire of cross-sectional area $10^{-6} \, m^2$ is elongated by $0.1 \%$ when the tension in it is $1000 \, N$. The Young's modulus of the material of the wire is (Assume radius of the wire is constant).

Vedclass Test Series

Exam Paper Generator

Online Exam Module