A copper wire and an aluminium wire have leng | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) Given: Ratio of lengths $l_1: l_2 = 5: 2$, ratio of diameters $d_1: d_2 = 4: 3$, and ratio of forces $F_1: F_2 = 4: 5$.Since $A = \pi r^2 = \pi (d

Vedclass · Accepted Answer

$\frac{63}{88}$

Vedclass · Answer

(B) Given: Ratio of lengths $l_1: l_2 = 5: 2$, ratio of diameters $d_1: d_2 = 4: 3$, and ratio of forces $F_1: F_2 = 4: 5$.Since $A = \pi r^2 = \pi (d/2)^2$, the ratio of areas is $A_1: A_2 = d_1^2: d_2^2 = 4^2: 3^2 = 16: 9$.Young's modulus is given by $Y = \frac{FL}{A \Delta l}$, so the increase in length is $\Delta l = \frac{FL}{AY}$.Therefore, the ratio of increase in length is $\frac{\Delta l_1}{\Delta l_2} = \frac{F_1}{F_2} 	imes \frac{l_1}{l_2} 	imes \frac{A_2}{A_1} 	imes \frac{Y_2}{Y_1}$.Substituting the values: $\frac{\Delta l_1}{\Delta l_2} = \left(\frac{4}{5}ight) 	imes \left(\frac{5}{2}ight) 	imes \left(\frac{9}{16}ight) 	imes \left(\frac{0.7 	imes 10^{11}}{1.1 	imes 10^{11}}ight)$.$\frac{\Delta l_1}{\Delta l_2} = 2 	imes \frac{9}{16} 	imes \frac{7}{11} = \frac{18}{16} 	imes \frac{7}{11} = \frac{9}{8} 	imes \frac{7}{11} = \frac{63}{88}$.Thus, the ratio is $\frac{63}{88}$.

Similar Questions

When a wire of length $L$ clamped at one end is pulled by a force $F$ from the other end,its length increases by $l$. If the radius of the wire and the applied force were halved,then the increase in its length is

The ratio of the areas of cross-sections of three wires is $1:2:3$ and the ratio of the Young's moduli of their materials is $3:2:1$. If the three wires are of the same length and the same stretching force is applied to the three wires, then the ratio of the elongations of the three wires is

Two exactly similar wires of steel and copper are stretched by equal forces. If the difference in their elongations is $0.5 \ cm$,find the elongation $(l)$ of each wire. Given: ${Y_s} = 2.0 \times {10^{11}} \ N/m^2$ and ${Y_c} = 1.2 \times {10^{11}} \ N/m^2$.

The adjacent graph shows the extension $(\Delta l)$ of a wire of length $1\, m$ suspended from the top of a roof at one end and with a load $W$ connected to the other end. If the cross-sectional area of the wire is $10^{-6}\, m^2$,calculate the Young's modulus of the material of the wire.

If the length of a wire is made double and the radius is halved of its respective values,then the Young's modulus of the material of the wire will:

Vedclass Test Series

Exam Paper Generator

Online Exam Module