The ratio of the areas of cross-sections of three wires is $1:2:3$ and the ratio of the Young's moduli of their materials is $3:2:1$. If the three wires are of the same length and the same stretching force is applied to the three wires, then the ratio of the elongations of the three wires is

The diameter of a brass rod is $4 \ mm$ and Young's modulus of brass is $9 \times 10^{10} \ N/m^2$. The force required to stretch it by $0.1\%$ of its original length is:

Two wires are made of the same material and have the same volume. The first wire has cross-sectional area $A$ and the second wire has cross-sectional area $3A$. If the length of the first wire is increased by $\Delta l$ on applying a force $F$,how much force is needed to stretch the second wire by the same amount?

$A$ rod of length $L$ at room temperature and uniform area of cross section $A$ is made of a metal having a coefficient of linear expansion $\alpha /^{\circ}C$. It is observed that an external compressive force $F$,applied on each of its ends,prevents any change in the length of the rod when its temperature rises by $\Delta T \, K$. The Young's modulus $Y$ for this metal is:

The ratio of Young's modulus of three wires is $2 : 2 : 1$ and the ratio of their cross-sectional areas is $1 : 2 : 3$. If the same force is applied to each,what is the ratio of the increase in their lengths?

Which coefficient of elasticity is responsible for the propagation of a wave in a string?