A metallic wire with tension T and at tempera | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) The fundamental frequency of a vibrating wire is given by $n = \frac{1}{2l} \sqrt{\frac{T}{\mu}}$, where $\mu$ is the mass per unit length.Since t

Vedclass · Accepted Answer

$0.5 	imes 10^{-4} /^{\circ} C$

Vedclass · Answer

(D) The fundamental frequency of a vibrating wire is given by $n = \frac{1}{2l} \sqrt{\frac{T}{\mu}}$, where $\mu$ is the mass per unit length.Since the tension $T$ and the mass per unit length $\mu$ (as the wire is the same) remain constant, we have $n \propto \frac{1}{l}$.Therefore, $\frac{n_1}{n_2} = \frac{l_2}{l_1}$.Given $n_1 = 1 \ kHz$ and $n_2 = 1.001 \ kHz$, we have $\frac{l_2}{l_1} = \frac{1}{1.001}$.Using the thermal expansion formula $l_2 = l_1(1 - \alpha \Delta t)$, where $\Delta t = 30^{\circ} C - 10^{\circ} C = 20^{\circ} C$:$\frac{l_1}{1.001} = l_1(1 - \alpha 	imes 20)$.$1 - 20\alpha = \frac{1}{1.001} \approx 1 - 0.001$.$20\alpha = 0.001$.$\alpha = \frac{0.001}{20} = 0.5 	imes 10^{-4} /^{\circ} C$.

$A$ metallic wire with tension $T$ and at temperature $30^{\circ} C$ vibrates with its fundamental frequency of $1 \ kHz$. The same wire with the same tension but at $10^{\circ} C$ temperature vibrates with a fundamental frequency of $1.001 \ kHz$. The coefficient of linear expansion of the wire is

Similar Questions

When a sonometer wire vibrates in the third overtone, the number of antinodes and nodes formed on the wire are respectively

$A$ string is divided into three segments such that the segments possess fundamental frequencies in the ratio $1: 2: 3$. Then,the lengths of the segments are in the ratio:

The length of the wire shown in the figure between the pulleys is $1.5 \, m$ and its mass is $12.0 \, g$. The frequency of vibration with which the wire vibrates in three loops,forming an antinode at the midpoint of the wire,is: (Given $g = 9.8 \, m/s^2$)

$A$ sonometer wire of length $1.5 \ m$ is made of steel. The tension in it produces an elastic strain of $1 \%$. What is the fundamental frequency of steel if density and elasticity of steel are $7.7 \times 10^3 \ kg/m^3$ and $2.2 \times 10^{11} \ N/m^2$ respectively (in $Hz$)?

$A$ device used for investigating the vibration of a fixed string or wire is

Vedclass Test Series

Exam Paper Generator

Online Exam Module