A Carnot engine uses diatomic gas as a workin | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) For a Carnot engine, the efficiency $\eta$ is given by $\eta = 1 - \frac{T_2}{T_1}$, where $T_1$ is the temperature of the source and $T_2$ is the

Vedclass · Accepted Answer

$75$

Vedclass · Answer

(B) For a Carnot engine, the efficiency $\eta$ is given by $\eta = 1 - \frac{T_2}{T_1}$, where $T_1$ is the temperature of the source and $T_2$ is the temperature of the sink.During the adiabatic expansion process, the relation between temperature and volume is $T V^{\gamma-1} = 	ext{constant}$.For a diatomic gas, the adiabatic index $\gamma = 1.4 = \frac{7}{5}$.Thus, $\gamma - 1 = 0.4 = \frac{2}{5}$.Given that the volume increases by a factor of $32$, i.e.,$V_2 = 32 V_1$.Using the adiabatic relation: $T_1 V_1^{\gamma-1} = T_2 V_2^{\gamma-1}$.$\frac{T_2}{T_1} = \left( \frac{V_1}{V_2} ight)^{\gamma-1} = \left( \frac{1}{32} ight)^{2/5}$.$\frac{T_2}{T_1} = \left( (2^5)^{-1} ight)^{2/5} = (2^{-5})^{2/5} = 2^{-2} = \frac{1}{4} = 0.25$.Now, the efficiency $\eta = 1 - \frac{T_2}{T_1} = 1 - 0.25 = 0.75$.Converting to percentage, $\eta = 75 \%$.

$A$ Carnot engine uses diatomic gas as a working substance. During the adiabatic expansion part of the cycle, if the volume of the gas becomes $32$ times its initial volume, then the efficiency of the engine is (in $\%$)

Similar Questions

The efficiency of a Carnot engine is $\eta$ when its hot and cold reservoirs are maintained at temperatures $T_1$ and $T_2$, respectively. To increase the efficiency to $1.5 \eta$, the increase in temperature $(\Delta T)$ of the hot reservoir, while keeping the cold reservoir constant at $T_2$, is

$A$ Carnot engine converts $1/6$th of the heat into work. When the temperature of the sink is reduced by $62 \ K$,the efficiency of the engine is doubled. Calculate the temperatures of the source and the sink.

$A$ Carnot heat engine absorbs $600 \ J$ of heat from a source at a temperature of $127^{\circ} C$ and rejects $400 \ J$ of heat to a sink in each cycle. The temperature of the sink is (in $K$)

$A$ Carnot engine having an efficiency of $40\%$ takes heat from a source maintained at a temperature of $500 \ K$. If the efficiency is to be increased to $60\%$ while keeping the sink temperature constant,what should be the new source temperature in $K$?

Even a Carnot engine cannot give $100\%$ efficiency because we cannot

Vedclass Test Series

Exam Paper Generator

Online Exam Module