$A$ cylinder of height $h$ is filled with water and is kept on a block of height $h/2$. The level of water in the cylinder is kept constant. Four holes numbered $1, 2, 3$ and $4$ are at the side of the cylinder and at heights $0, h/4, h/2$ and $3h/4$ from the base of the cylinder, respectively. When all four holes are opened together, the hole from which water will reach the farthest distance on the plane $PQ$ is the hole number:

$A$ cylindrical vessel filled with water up to a height of $H$ stands on a horizontal plane. The side wall of the vessel has a plugged circular hole touching the bottom. The coefficient of friction between the bottom of the vessel and the plane is $\mu$ and the total mass of the water plus the vessel is $M$. What should be the minimum diameter of the hole so that the vessel begins to move on the floor if the plug is removed? (Here,the density of water is $\rho$)

$A$ cylindrical tank with a large diameter is filled with water. Water drains out through a hole at the bottom of the tank. If the cross-sectional area of the hole is $6 \ cm^2$, then the drainage rate in $m^3 s^{-1}$ when the depth of the water is $0.2 \ m$ is:

$A$ large tank is filled with water (density $= 10^3 \ kg/m^3$). $A$ small hole is made at a depth $10 \ m$ below the water surface. The range of water issuing out of the hole is $R$ on the ground. What extra pressure must be applied on the water surface so that the range becomes $2R$? (Take $1 \ atm = 10^5 \ Pa$ and $g = 10 \ m/s^2$)

$A$ large tank filled with water to a height $h$ is to be emptied through a small hole at the bottom. The ratio of times taken for the level of water to fall from $h$ to $h/2$ and from $h/2$ to zero is

$A$ vessel is filled with water up to a height $h$. When a hole is made at the bottom,all the water drains out in time $t$. If the vessel is filled with water up to a height $4h$,how long will it take for the water to drain out completely when a hole is made at the bottom?