The ratio of thermal conductivities of two materials is $1 : 2$. If the ratio of the lengths of the rods of these materials is $1 : 2$ and the ratio of their cross-sectional areas is $2 : 1$,then the ratio of their thermal resistances is:

The figure shows three different arrangements of materials $1, 2$,and $3$ to form a wall. The thermal conductivities are $k_1 > k_2 > k_3$. The left side of the wall is $20\,^{\circ}\text{C}$ higher than the right side. The temperature difference $\Delta T$ across material $1$ has the following relation in the three cases:

Four rods of the same material and having the same cross-section and length have been joined as shown in the figure. The temperature of the junction of the four rods will be ............... $^{\circ}C$.

Six identical conducting rods are joined as shown in the figure. Points $A$ and $D$ are maintained at $100^{\circ} C$ and $10^{\circ} C$ respectively. The temperature of junction $C$ will be $.... ^{\circ} C$.

$A$ copper rod $2 \ m$ long has a circular cross-section of radius $1 \ cm$. One end is kept at $100^{\circ}C$ and the other at $0^{\circ}C$,and the surface is covered by non-conducting material to prevent heat losses through the surface. The thermal resistance of the bar in Kelvin per Watt is (Take thermal conductivity $K = 401 \ W/m-K$ of copper):- (in $.9$)

Two rods $A$ and $B$ of different materials but same cross-section are joined as shown in the figure. The free end of $A$ is maintained at $100^{\circ}C$ and the free end of $B$ is maintained at $0^{\circ}C$. If $l_2 = 2l_1$,$K_1 = 2K_2$ and the rods are thermally insulated from the sides to prevent heat losses,then the temperature $\theta$ of the junction of the two rods is ........ $^{\circ}C$.