$A$ brass wire $1.8\; m$ long at $27\;^{\circ}C$ is held taut with little tension between two rigid supports. If the wire is cooled to a temperature of $-39\;^{\circ}C$,what is the tension developed in the wire,if its diameter is $2.0\; mm$? (Coefficient of linear expansion of brass $\alpha = 2.0 \times 10^{-5}\; K^{-1}$; Young's modulus of brass $Y = 0.91 \times 10^{11}\; Pa$)

$A$ wooden wheel of radius $R$ is made of two semicircular parts (see figure). The two parts are held together by a ring made of a metal strip of cross-sectional area $S$ and length $L$. $L$ is slightly less than $2\pi R$. To fit the ring on the wheel,it is heated so that its temperature rises by $\Delta T$ and it just slips over the wheel. As it cools down to the surrounding temperature,it presses the semicircular parts together. If the coefficient of linear expansion of the metal is $\alpha$,and its Young's modulus is $Y$,the force that one part of the wheel applies on the other part is:

$A$ mild steel wire of length $2l$ meter and cross-sectional area $A \; m^2$ is fixed horizontally between two pillars. $A$ small mass $m \; kg$ is suspended from the midpoint of the wire. If the extension in the wire is within the elastic limit,then the depression $x$ at the midpoint of the wire will be:

$A$ steel ring of radius $r$ and cross-section area $A$ is fitted onto a wooden disc of radius $R$ $(R > r)$. If Young's modulus is $E$,then the force with which the steel ring is expanded is

Same tension is applied to the following four wires made of same material. The elongation is longest in

The adjacent graph shows the extension $(\Delta l)$ of a wire of length $1\, m$ suspended from the top of a roof at one end and with a load $W$ connected to the other end. If the cross-sectional area of the wire is $10^{-6}\, m^2$,calculate the Young's modulus of the material of the wire.