$A$ steel ring of radius $r$ and cross-section area $A$ is fitted onto a wooden disc of radius $R$ $(R > r)$. If Young's modulus is $E$,then the force with which the steel ring is expanded is

Two wires $A$ and $B$ made of different materials of length $6.0 \ cm$ and $5.4 \ cm$, respectively, and area of cross-sections $3.0 \times 10^{-5} \ m^2$ and $4.5 \times 10^{-5} \ m^2$, respectively, are stretched by the same magnitude under a given load. The ratio of the Young's modulus of $A$ to that of $B$ is $x : 3$. The value of $x$ is . . . . . . . . . . .

When a rod is heated but prevented from expanding,the stress developed is independent of

As shown in the figure,a light uniform rod $PQ$ of length $150 \ cm$ is suspended from the ceiling horizontally using two metal wires $A$ and $B$ tied to the ends of the rod. The ratios of the radii and the Young's moduli of the materials of the two wires $A$ and $B$ are respectively $2:3$ and $3:2$. The position at which a weight should be suspended from the rod such that the elongations of the two wires become equal is

Which one is more elastic,steel or plastic? Why?

The area of cross-section of the rope used to lift a load by a crane is $2.5 \times 10^{-4} \, m^2$. The maximum lifting capacity of the crane is $10$ metric tons. To increase the lifting capacity of the crane to $25$ metric tons,the required area of cross-section of the rope should be $......... \times 10^{-4} \, m^2$ (take $g = 10 \, m/s^2$).