$A$ composite rod is made of three rods of equal length and cross-section as shown in the figure. The thermal conductivities of the materials of the rods are $K/2, 5K$ and $K$ respectively. The ends $A$ and $B$ are at constant temperatures. All heat entering the face $A$ goes out of the end $B$,with no loss of heat from the sides of the bar. The effective thermal conductivity of the bar is:

$A$ cylinder of radius $R$ is made of a material with thermal conductivity $K_1$. It is surrounded by a cylindrical shell of a material with thermal conductivity $K_2$,having an inner radius $R$ and an outer radius $2R$. The two ends of this composite system are maintained at two different temperatures. There is no heat loss from the surface of the cylinder in the steady state. Find the equivalent thermal conductivity of the system.

The ratio of thermal conductivity of two rods $A$ and $B$ with the same area of cross-section is $3: 2$. If the thermal resistance of two rods is the same,then the ratio of length of rod $A$ to length of rod $B$ is

Consider the situation as shown in the figure. Find the amount of heat flowing per second through a cross-section of the bent part,if the total heat taken out per second from the end at $200^{\circ} C$ is $150 \ J/s$.

Six wires,each of cross-sectional area $A$ and length $l$,are combined as shown in the figure. The thermal conductivities of copper and iron are $K_1$ and $K_2$ respectively. The equivalent thermal resistance between points $A$ and $C$ is:

Two rods $A$ and $B$ of different materials but same cross-section are joined as shown in the figure. The free end of $A$ is maintained at $100^{\circ}C$ and the free end of $B$ is maintained at $0^{\circ}C$. If $l_2 = 2l_1$,$K_1 = 2K_2$ and the rods are thermally insulated from the sides to prevent heat losses,then the temperature $\theta$ of the junction of the two rods is ........ $^{\circ}C$.