Six wires,each of cross-sectional area $A$ and length $l$,are combined as shown in the figure. The thermal conductivities of copper and iron are $K_1$ and $K_2$ respectively. The equivalent thermal resistance between points $A$ and $C$ is:

The dimensions of thermal resistance are

Two identical metal rods are welded end-to-end as shown in figure $(1)$. It takes $4 \ min$ for $20 \ cal$ of heat to flow through them. If these rods are now welded side-by-side as shown in figure $(2)$,the time taken for the same amount of heat to flow through them is .......... $\min$.

$A$ wall consists of two layers $A$ and $B$. Both layers have the same thickness but are made of different materials. The thermal conductivity of $A$ is twice that of $B$. In the steady state,the temperature difference across the two ends of the wall is $36^{\circ}C$. What is the temperature difference across the two ends of layer $A$ in $^{\circ}C$?

$A$ copper rod $2 \ m$ long has a circular cross-section of radius $1 \ cm$. One end is kept at $100^{\circ}C$ and the other at $0^{\circ}C$,and the surface is covered by non-conducting material to prevent heat losses through the surface. The thermal resistance of the bar in Kelvin per Watt is (Take thermal conductivity $K = 401 \ W/m-K$ of copper):- (in $.9$)

Two cylinders $P$ and $Q$ have the same length and diameter and are made of different materials having thermal conductivities in the ratio $2 : 3$. These two cylinders are combined to make a single cylinder. One end of $P$ is kept at $100^{\circ}C$ and the other end of $Q$ is kept at $0^{\circ}C$. The temperature at the interface of $P$ and $Q$ is ...... $^{\circ}C$.