$A$ container of liquid is released from rest on a smooth inclined plane as shown in the figure. The length of the inclined plane is sufficient. Assume the liquid finally reaches equilibrium relative to the container. The final liquid surface makes an angle with the horizontal of ...... $^o$.

An incompressible liquid is kept in a container having a weightless piston with a hole. $A$ capillary tube of inner radius $0.1 \,mm$ is dipped vertically into the liquid through the airtight piston hole,as shown in the figure. The air in the container is isothermally compressed from its original volume $V_0$ to $\frac{100}{101} V_0$ with the movable piston. Considering air as an ideal gas,the height $(h)$ of the liquid column in the capillary above the liquid level in $cm$ is. . . . . . .
[Given: Surface tension of the liquid is $0.075 \,N \,m^{-1}$,atmospheric pressure is $10^5 \,N \,m^{-2}$,acceleration due to gravity $(g)$ is $10 \,m \,s^{-2}$,density of the liquid is $10^3 \,kg \,m^{-3}$ and contact angle of capillary surface with the liquid is zero]

$A$ cylindrical container is filled with liquid. When the container is rotated about its axis,the liquid rises along its sides. If the radius of the container is $r$ and the angular velocity of the container is $\omega$ rad/s,what will be the difference in the height of the liquid at the center and at the sides?

$A$ drop of water detaches itself from the exit of a tap when $(\sigma=$ surface tension of water, $\rho=$ density of water, $R=$ radius of the tap exit, $r=$ radius of the drop $)$

$A$ motor is used to deliver water at a certain rate through a given horizontal pipe. To deliver $n$-times the water through the same pipe in the same time, the power of the motor must be increased as follows:

The cross-sectional area of a horizontal tube increases along its length linearly as we move in the direction of flow. The variation of pressure, as we move along its length in the direction of flow ($x$-direction), is best depicted by which of the following graphs?