A galvanometer has a resistance of 20,Omega a | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) Given: Galvanometer resistance $R_g = 20\,\Omega$,full-scale voltage $V_g = 0.2\,V$,and target current $I = 10\,A$.First,calculate the full-scale

Vedclass · Accepted Answer

$0.02\,\Omega$ resistor connected across it

Vedclass · Answer

(B) Given: Galvanometer resistance $R_g = 20\,\Omega$,full-scale voltage $V_g = 0.2\,V$,and target current $I = 10\,A$.First,calculate the full-scale deflection current $I_g$ of the galvanometer:$I_g = \frac{V_g}{R_g} = \frac{0.2\,V}{20\,\Omega} = 0.01\,A$.To convert a galvanometer into an ammeter of range $I$,a shunt resistance $S$ must be connected in parallel with the galvanometer coil.The formula for shunt resistance is:$S = \frac{I_g R_g}{I - I_g}$.Substituting the values:$S = \frac{0.01 	imes 20}{10 - 0.01} = \frac{0.2}{9.99} \approx 0.02\,\Omega$.Therefore,a $0.02\,\Omega$ resistor should be connected in parallel (across) the galvanometer.

$A$ galvanometer has a resistance of $20\,\Omega$ and reads full-scale when $0.2\,V$ is applied across it. To convert it into a $10\,A$ ammeter,the galvanometer coil should have a

Similar Questions

Consider the following two statements $A$ and $B$ and identify the correct choice given in the answers.
$A$. Duddell's thermo-galvanometer is suitable to measure direct current only.
$B$. Thermopile can measure temperature differences of the order of $10^{-3} \, ^\circ C$.

$A$ galvanometer has a $50$ division scale. The battery has no internal resistance. It is found that there is a deflection of $40$ divisions when $R = 2400\,\Omega$. The deflection becomes $20$ divisions when the resistance taken from the resistance box is $4900\,\Omega$. Then we can conclude:

$A$ voltmeter has a resistance of $2000 \, \Omega$ and it can measure up to $2 \, V$. If we want to increase its range to $10 \, V$, then the required resistance in series will be ........... $\Omega$.

To convert a galvanometer into an ammeter,one needs to connect a

$A$ voltmeter having a resistance of $998 \, \Omega$ is connected to a cell of $e.m.f.$ $2 \, V$ and internal resistance $2 \, \Omega$. The error in the measurement of $e.m.f.$ will be

Vedclass Test Series

Exam Paper Generator

Online Exam Module