$A$ galvanometer of resistance $25\,\Omega$ gives full-scale deflection for a current of $10\,mA$. It is to be converted into a voltmeter of range $100\,V$ by connecting a resistance $R$ in series with the galvanometer. The value of resistance $R$ in $\Omega$ is:

$A$ galvanometer of resistance $50\, \Omega$ is connected to a battery of $3\, V$ along with a resistance of $2950\, \Omega$ in series. $A$ full-scale deflection of $30$ divisions is obtained in the galvanometer. In order to reduce this deflection to $20$ divisions,the resistance in series should be.......$\Omega$

$A$ microammeter has a resistance of $100\,\Omega$ and a full-scale range of $50\,\mu A$. It can be used as a voltmeter or as a higher-range ammeter provided a resistance is added to it. Pick the correct range and resistance combination.

When a shunt resistance of $4r$ is connected to a galvanometer,it becomes an ammeter that can measure $0.03 \, A$. When a shunt resistance of $r$ is connected to the same galvanometer,it becomes an ammeter that can measure $0.06 \, A$. What is the current capacity $(i_g)$ of the galvanometer in $A$?

$A$ moving coil galvanometer has a coil with $175$ turns and an area of $1 \, cm^2$. It uses a torsion band with a torsion constant of $10^{-6} \, N \cdot m/rad$. The coil is placed in a magnetic field $B$ parallel to its plane. The coil deflects by $10^{\circ}$ for a current of $1 \, mA$. The value of $B$ (in Tesla) is approximately:

If $n$ represents the actual number of deflections in a converted galvanometer of resistance $G$ and shunt resistance $S$,then the total current $I$ when its figure of merit is $K$ will be: