$A$ hole is drilled in a copper sheet. The diameter of the hole is $4.24 \,cm$ at $27.0^{\circ} C$. What is the diameter of the hole when it is heated to $35^{\circ} C$?

$A$ cylindrical metal rod of length $L_0$ is shaped into a ring with a small gap as shown. On heating the system,

If two rods of length $L$ and $2L$ having coefficients of linear expansion $\alpha$ and $2\alpha$ respectively are connected so that the total length becomes $3L$,the average coefficient of linear expansion of the composite rod equals:

$A$ cylinder has a piston at a temperature of $30^{\circ} C$. There is an all-round clearance of $0.08 \ mm$ between the piston and the cylinder wall. If the internal diameter of the cylinder is $15 \ cm$,what is the temperature at which the piston will fit into the cylinder exactly (in $^{\circ} C$)? $(\alpha_p = 1.6 \times 10^{-5} /^{\circ} C$ and $\alpha_c = 1.2 \times 10^{-5} /^{\circ} C)$

An iron rod has a length of $10 \ cm$ at $20^{\circ}C$. What will be the change in length of the iron rod at $19^{\circ}C$? (Given for iron,$\alpha = 11 \times 10^{-6} \ ^{\circ}C^{-1}$)

In the figure, which strip, brass or steel, has a higher coefficient of linear expansion?