A mass m is attached to a thin wire and whirl | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) For a mass $m$ moving in a vertical circle of radius $R$,the tension $T$ in the wire at any angular position $	heta$ from the lowest point is giv

Vedclass · Accepted Answer

the mass is at the lowest point

Vedclass · Answer

(C) For a mass $m$ moving in a vertical circle of radius $R$,the tension $T$ in the wire at any angular position $	heta$ from the lowest point is given by the equation:$T - mg \cos 	heta = \frac{mv^2}{R}$$T = mg \cos 	heta + \frac{mv^2}{R}$At the lowest point,$	heta = 0^{\circ}$,so $\cos 0^{\circ} = 1$. Also,the velocity $v$ is maximum at the lowest point due to the conservation of energy.Since both $\cos 	heta$ and $v$ are at their maximum values at the lowest point,the tension $T$ is maximum at this position.Therefore,the wire is most likely to break when the mass is at the lowest point.

$A$ mass $m$ is attached to a thin wire and whirled in a vertical circle. The wire is most likely to break when

Similar Questions

$A$ stone of mass $m$ is tied to a string and is moved in a vertical circle of radius $r$ making $n$ revolutions per minute. The total tension in the string when the stone is at its lowest point is

$A$ particle originally at rest at the highest point of a smooth vertical circle is slightly displaced. It will leave the circle at a vertical distance $h$ below the highest point,such that

$A$ can filled with water is revolved in a vertical circle of radius $r$ with constant speed such that the water just does not fall out. The time period of revolution is ($g=$ acceleration due to gravity).

$A$ particle originally at rest at the highest point of a smooth vertical circle (radius $R = 1.8 \ m$) is slightly displaced. It will leave the circle at a vertical distance $h$ from the bottom. The value of $h$ will be ..... $m$.

$A$ stone of mass $1 \ kg$ is tied to a string $2 \ m$ long and is rotated at a constant speed of $40 \ ms^{-1}$ in a vertical circle. The ratio of the tension at the top and the bottom is [Take $g = 10 \ ms^{-2}$].

Vedclass Test Series

Exam Paper Generator

Online Exam Module