$A$ plano-convex lens of unknown material and unknown focal length is given. With the help of a Spherometer,we can measure the,

The diameter of a cylinder is measured using a vernier callipers with no zero error. It is found that the zero of the vernier scale lies between $5.10 \ cm$ and $5.15 \ cm$ of the main scale. The vernier scale has $50$ divisions equivalent to $2.45 \ cm$. The $24^{\text{th}}$ division of the vernier scale exactly coincides with one of the main scale divisions. The diameter of the cylinder is: (in $cm$)

In a screw gauge,$5$ complete rotations of the screw cause it to move a linear distance of $0.25\, cm$. There are $100$ circular scale divisions. The thickness of a wire measured by this screw gauge gives a reading of $4$ main scale divisions and $30$ circular scale divisions. Assuming negligible zero error,the thickness of the wire is (in $, cm$)

In an experiment with Vernier callipers of least count $0.1\,mm$,when two jaws are joined together,the zero of the Vernier scale lies to the right of the zero of the main scale and the $6^{th}$ division of the Vernier scale coincides with a main scale division. While measuring the diameter of a spherical bob,the zero of the Vernier scale lies between $3.2\,cm$ and $3.3\,cm$ marks,and the $4^{th}$ division of the Vernier scale coincides with a main scale division. The diameter of the bob is measured as $.......\,cm$.

In a screw gauge, the zero of the circular scale lies $3$ divisions above the horizontal pitch line when their metallic studs are brought in contact. Using this instrument, the thickness of a sheet is measured. If the pitch scale reading is $1 \ mm$ and the circular scale reading is $51$, then the correct thickness of the sheet is . . . . . . $mm$. [Assume least count is $0.01 \ mm$]

The diagrams show readings of a screw gauge. Figure $(i)$ shows the zero error reading when the screw gauge is closed,and figure $(ii)$ shows the reading when the screw gauge is being used to measure the diameter of a ball-bearing. What is the diameter of the ball-bearing in $mm$? There are $50$ divisions on the circular scale.