$A$ square loop $PQRS$ having $10$ turns, area $3.6 \times 10^{-3} \, m^2$ and resistance $100 \, \Omega$ is slowly and uniformly being pulled out of a uniform magnetic field of magnitude $B=0.5 \, T$ as shown. Work done in pulling the loop out of the field in $1.0 \, s$ is . . . . . $\times 10^{-6} \, J$.

$A$ metallic frame moves with constant velocity $v$ near an infinitely long current-carrying wire. At any instant,the induced $emf$ in sides $AD$ and $BC$ are $5\,V$ and $2\,V$ respectively. If the resistance of the frame is $6\,\Omega$,find the magnitude and direction of the induced current in it.

$A$ rectangular wire loop of sides $8 \;cm$ and $2 \;cm$ with a small cut is moving out of a region of uniform magnetic field of magnitude $0.3 \;T$ directed normal to the loop. What is the emf developed across the cut if the velocity of the loop is $1 \;cm \,s^{-1}$ in a direction normal to the $(a)$ longer side,$(b)$ shorter side of the loop? For how long does the induced voltage last in each case?

$A$ straight conductor of length $4 \,m$ moves at a speed of $10 \,m/s$. When the conductor makes an angle of $30^{\circ}$ with the direction of a magnetic field of induction $0.1 \,Wb/m^2$, the induced emf is: (in $\,V$)

$A$ pair of parallel conducting rails lie at a right angle to a uniform magnetic field of $2.0\, T$ as shown in the figure. Two resistors,$10\,\Omega$ and $5\,\Omega$,slide without friction along the rails. The distance between the conducting rails is $0.1\, m$. Then:

$A$ metallic disc of radius $0.3 \ m$ is rotating with a constant angular speed of $60 \ rad \ s^{-1}$ in a plane perpendicular to a uniform magnetic field of $5 \times 10^{-2} \ T$. The emf induced between a point on the rim and the centre of the disc is: (in $V$)