$A$ steel wire of diameter $2 \,mm$ has a breaking strength of $4 \times 10^5 \,N$. What is the breaking force in $\times 10^5 \,N$ for a similar steel wire of diameter $1.5 \,mm$?

One end of a steel wire is fixed to the ceiling of an elevator moving up with an acceleration $2 \ m/s^2$ and a load of $10 \ kg$ hangs from the other end. If the cross-section of the wire is $2 \ cm^2$, then the longitudinal strain in the wire will be ($g = 10 \ m/s^2$ and $Y = 2.0 \times 10^{11} \ N/m^2$).

$A$ body of mass $10 \, kg$ is attached to the end of a wire of length $0.3 \, m$. If the breaking stress of the wire is $4.8 \times 10^7 \, N/m^2$ and its cross-sectional area is $10^{-6} \, m^2$,what is the maximum angular velocity in $rad/sec$ with which it can be rotated in a horizontal plane without breaking the wire?

$A$ solid that transmits light in the visible region and has a very low melting point possesses:

$A$ spring is stretched by applying a load to its free end. The strain produced in the spring is

$A$ wire of density $3 \times 10^3 \, kg/m^3$ requires a breaking stress of $10^6 \, N/m^2$ to break. What should be the length of the wire so that it breaks under its own weight? (Take $g = 10 \, m/s^2$)