$A$ wire of length $L$ and radius $r$ is clamped rigidly at one end. When the other end of the wire is pulled by a force $F$,its length increases by $5\,cm$. Another wire of the same material of length $4L$ and radius $4r$ is pulled by a force $4F$ under the same conditions. The increase in length of this wire is $....cm$.

$A$ $0.1 \,kg$ mass is suspended from a wire of negligible mass. The length of the wire is $1 \,m$ and its cross-sectional area is $4.9 \times 10^{-7} \,m^2$. If the mass is pulled a little in the vertically downward direction and released, it performs simple harmonic motion of angular frequency $140 \,rad \,s^{-1}$. If the Young's modulus of the material of the wire is $n \times 10^9 \,N \,m^{-2}$, the value of $n$ is

An iron rod of length $2\, m$ and cross-sectional area of $50\, mm^2$ is stretched by $0.5\, mm$ when a mass of $250\, kg$ is hung from its lower end. The Young's modulus of the iron rod is:

$A$ steel rod has a radius of $10 \,mm$ and a length of $1 \,m$. $A$ $80 \,kN$ force stretches it along its length. If the Young's modulus of the rod is $2 \times 10^{11} \,N/m^2$, then the change in length is

$A$ ring of a thin wire of cross-sectional area $a$ and length $l$ is dipped into a liquid of surface tension $\sigma$ and taken out so that a film of liquid is formed in the ring. If Young's modulus of the material of the wire is $Y$,then the longitudinal strain developed in the ring will be:

What is the Young's modulus and bulk modulus for a perfect rigid body?