As per the given figure,two plates A and B of | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The rate of heat flow is given by $\frac{\Delta Q}{\Delta t} = \left(\frac{1}{R}\right) \Delta T$,where $R$ is the thermal resistance.For a plate

Vedclass · Accepted Answer

$21$

Vedclass · Answer

(B) The rate of heat flow is given by $\frac{\Delta Q}{\Delta t} = \left(\frac{1}{R}ight) \Delta T$,where $R$ is the thermal resistance.For a plate of thickness $L$,thermal conductivity $K$,and area $A$,the thermal resistance is $R = \frac{L}{KA}$.For plate $A$: $R_{1} = \frac{L_{1}}{K_{1}A} = \frac{4.0}{K(120)}$.For plate $B$: $R_{2} = \frac{L_{2}}{K_{2}A} = \frac{2.5}{(2K)(120)}$.Since the plates are in series,the equivalent thermal resistance is $R_{	ext{eq}} = R_{1} + R_{2}$.The equivalent thermal conductivity $K_{	ext{eq}}$ for a compound plate of total thickness $L_{	ext{eq}} = L_{1} + L_{2}$ and area $A$ is given by $\frac{L_{	ext{eq}}}{K_{	ext{eq}}A} = \frac{L_{1}}{K_{1}A} + \frac{L_{2}}{K_{2}A}$.Substituting the values: $\frac{4.0 + 2.5}{K_{	ext{eq}}(120)} = \frac{4.0}{K(120)} + \frac{2.5}{2K(120)}$.$\frac{6.5}{K_{	ext{eq}}} = \frac{4}{K} + \frac{1.25}{K} = \frac{5.25}{K} = \frac{21/4}{K} = \frac{21}{4K}$.Therefore,$K_{	ext{eq}} = \frac{6.5 	imes 4K}{21} = \frac{26}{21}K = \left(1 + \frac{5}{21}ight)K$.Comparing this with $\left(1 + \frac{5}{\alpha}ight)K$,we get $\alpha = 21$.

Similar Questions

$A$ metallic prong consists of $4$ rods made of the same material,with the same cross-sections and the same lengths as shown below. The three forked ends are kept at $100^{\circ} C$ and the handle end is at $0^{\circ} C$. The temperature of the junction is ............. $^{\circ} C$.

Consider two insulating sheets with thermal resistances $R_1$ and $R_2$ as shown in the figure. The temperature $\theta$ at the junction is:

$A$ wall is made of two layers of thickness $1\ cm$ and $4\ cm$ and thermal conductivities $K$ and $3K$ respectively. If the temperature difference across the wall is $50\ ^oC$,then the temperature difference across the thin layer will be

Five metal rods of the same cross-sectional area $A$ and same length $l$ are connected as shown in the figure. If the thermal conductivities of copper and steel are $K_1$ and $K_2$ respectively,then the resultant thermal resistance between $A$ and $C$ is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module