As shown in the figure,forces of $10^5\,N$ each are applied in opposite directions on the upper and lower faces of a cube of side $10\,cm$,shifting the upper face parallel to itself by $0.5\,cm$. If the side of another cube of the same material is $20\,cm$,then under similar conditions as above,the displacement will be ......... $cm$.

$A$ cube has side length $5$ cm and modulus of rigidity $10^5$ $N$/m$^2$. The displacement produced by a force of $10$ $N$ in the upper face of cube is . . . . . . mm.

$A$ rectangular metallic block of dimensions $40 \text{ mm} \times 20 \text{ mm}$ when pulled with a tension of $50 \text{ kN}$ undergoes only elastic deformation. The strain in the block is (The shear modulus of the material of the block is $40 \times 10^9 \text{ Nm}^{-2}$)

Given below are two statements: One is labelled as Assertion $(A)$ and the other is labelled as Reason $(R)$.
Assertion $(A)$: The stretching of a spring is determined by the shear modulus of the material of the spring.
Reason $(R)$: $A$ coil spring of copper has more tensile strength than a steel spring of same dimensions.
In the light of the above statements,choose the most appropriate answer from the options given below:

The dimensions of shear modulus are

$A$ force $F$ of the same magnitude is applied tangentially on the upper and lower faces of a cube in opposite directions. The side of the cube is $L$. The upper face of the cube shifts parallel to itself by a distance $x_{1}$. If another cube of the same material but with side $2L$ is subjected to the same condition,then the displacement of the top layer is: