As shown in the figure,the voltmeter reads $2\,V$ across the $5\,\Omega$ resistor. The resistance of the voltmeter is $.......\,\Omega$.

An electrical circuit consists of ten $100 \,\Omega$ resistors. Out of these $10$ resistors,a group of $n_1$ resistors are connected in parallel and another group of $n_2$ resistors are separately connected in parallel. These two groups are then connected in series and this combination is connected to a voltage source of $100 \,V$. If the net current through the circuit is $2.5 \,A$,the values of $n_1$ and $n_2$ are:

$A, B$ and $C$ are voltmeters of resistance $R, 1.5R$ and $3R$ respectively as shown in the figure. When some potential difference is applied between $X$ and $Y$,the voltmeter readings are $V_A, V_B$ and $V_C$ respectively. Then

If each resistance in the figure is of $9\,\Omega$,then the reading of the ammeter is ............ $A$.

If a high power heater is connected to electric mains,then the bulbs in the house become dim,because there is a

$A$ potential divider is used to give outputs of $4\,V$ and $8\,V$ from a $12\,V$ source. Which combination of resistances,$(R_1 : R_2 : R_3)$ gives the correct voltages?