Column $-II$ is related to Column $-I$. Join them appropriately:

Column $-I$	Column $-II$
$(a)$ When temperature is raised,Young's modulus of a body	$(i)$ Zero
$(b)$ Young's modulus for air	$(ii)$ Infinite
	$(iii)$ Decreases
	$(iv)$ Increases

One end of a metal wire is fixed to a ceiling and a load of $2 \ kg$ hangs from the other end. $A$ similar wire is attached to the bottom of the load and another load of $1 \ kg$ hangs from this lower wire. Then the ratio of longitudinal strain of the upper wire to that of the lower wire will be . . . . . . .
[Area of cross section of wire $= 0.005 \ cm^2$,$Y = 2 \times 10^{11} \ Nm^{-2}$ and $g = 10 \ ms^{-2}$]

Increase in length of a wire is $1 \, mm$ when suspended by a weight. If the same weight is suspended on a wire of double its length and double its radius,the increase in length will be ........ $mm$.

The unit of Young's modulus is

$A$ thick brass wire of length $L$ and density $\rho$ is suspended from a rigid support. Due to its own weight,$\ell$ is the increase in length. The Young's modulus $Y$ of the brass wire in terms of density is $(g = \text{acceleration due to gravity})$

Stress required in a wire to produce $0.1\%$ strain is $4 \times 10^8 \, N/m^2$. Its Young's modulus is $Y_1$. If stress required in another wire to produce $0.3\%$ strain is $6 \times 10^8 \, N/m^2$,and its Young's modulus is $Y_2$,which relation is correct?