Consider a 20, kg uniform circular disk of ra | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) Given: Mass $m = 20\, kg$,Radius $R = 0.2\, m$,Force $F = 20\, N$,Initial angular speed $\omega_0 = 0$,Final angular speed $\omega = 50\, rad/s$.T

Vedclass · Accepted Answer

$20$

Vedclass · Answer

(C) Given: Mass $m = 20\, kg$,Radius $R = 0.2\, m$,Force $F = 20\, N$,Initial angular speed $\omega_0 = 0$,Final angular speed $\omega = 50\, rad/s$.The torque $	au$ applied by the force $F$ is $	au = F \cdot R$.The moment of inertia of the disk about its center is $I = \frac{1}{2} mR^2$.Using $	au = I\alpha$,the angular acceleration $\alpha$ is:$\alpha = \frac{F \cdot R}{\frac{1}{2} mR^2} = \frac{2F}{mR} = \frac{2 	imes 20}{20 	imes 0.2} = \frac{2}{0.2} = 10\, rad/s^2$.Using the kinematic equation $\omega^2 = \omega_0^2 + 2\alpha\Delta	heta$:$(50)^2 = 0^2 + 2(10)\Delta	heta$$2500 = 20\Delta	heta$$\Delta	heta = 125\, rad$.Since one revolution corresponds to $2\pi \approx 6.28\, rad$,the number of revolutions $n$ is:$n = \frac{\Delta	heta}{2\pi} = \frac{125}{6.28} \approx 19.90$.Rounding to the nearest integer,$n = 20$.

Similar Questions

$A$ uniform metre stick of mass $M$ and length $L = 1 \ m$ is hinged at one end and supported in a horizontal direction by a string attached to the other end. What should be the initial angular acceleration of the free end of the stick if the string is cut? (in $rad/s^2$)

$A$ torque of $10^5 \ N \cdot m$ is applied to a disc of mass $10 \ kg$ and radius of gyration $50 \ m$. What is the value of the angular acceleration in $rad/s^2$?

$A$ rectangular plate of mass $20 \ kg$ is suspended from points $A$ and $B$ as shown in the figure. If the pin at $B$ is suddenly removed,find the angular acceleration of the plate in $rad/s^2$.

$A$ wheel of mass $20 \,kg$ and radius $30 \,cm$ is rotating at an angular speed of $80 \,rev/min$ when the motor is turned off. Neglecting the friction at the axis, calculate the force that must be applied tangentially to the wheel to bring it to rest in $5 \,rev$. (in $\pi \,N$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module